Troubleshooting No Power
- There are no adjustments to the robot, so if a faulty or worn part causes the robot to malfunction, replace that part.
- If you are not skilled at soldering, you should send in your Control Box for service if soldering is indicated. Control Box parts are small and easily damaged. Improper soldering may void your warranty and service policy.
- If you open the Control Box, unscrew only the 4 corner screws. Do not remove the 4 screws in the middle.
- The following solutions will apply to all models of Newgy Robots, except if marked with the following
footnotes: 1 Robo-Pong® 1000 only, 2 Robo-Pong® 2000 only, 9 Model 1929 only.
|PROBLEM:||No robot functions work and Power Switch on Control Box does not light up when turned on.|
|PROBLEM:||No robot functions work and the Power Switch lights up when turned on.|
1 Applies to Robo-Pong® 1000 robots only.
2 Applies to Robo-Pong® 2000 robots only.
9 Applies to Model 1929 robots only.