| 1929 Part
# |
1929 Part Name |
2000 Part
# |
2000 Part Name |
Notes |
| 752-201 |
Center Trough Assembly |
mismatch |
|
different shape,
color |
| 752-202 |
Metal Net Support |
mismatch |
|
not used |
| 752-204 |
Center U Support
Upright |
mismatch |
|
diff. size |
| 752-205 |
Back Support Plate |
mismatch |
|
not used |
| 752-206 |
Net Support Tube
Curved |
mismatch |
|
diff. length, curve |
| 752-207 |
Support Leg, L |
mismatch |
|
diff. size, curve,
can use 2000-110 if it is bent slightly so robot sits level
on table |
| 752-208 |
Front Support Plate |
mismatch |
|
diff. attachment |
| 752-209 |
Net Support Plate,
Front |
mismatch |
|
diff. shape, size,
color |
| 752-210 |
Net Support Plate,
Rear |
mismatch |
|
diff. shape, size,
color |
| 752-212 |
Support Leg, R |
mismatch |
|
diff. size, curve,
can use 2000-112
if it is bent slightly so robot sits level on table |
| 752-213 |
Net Support Tube,
Straight |
mismatch |
|
diff. length |
| 752-217 |
Net |
mismatch |
|
diff. shape, size |
| 752-219 |
1/4×3/4 Phillips
Head Screw |
mismatch |
|
not used |
| 752-225 |
#8×1" Machine
Screws |
mismatch |
|
diff. thread, can
use 2000-302 if
replaced along with 2000-310 |
| 752-227 |
#8-32 Hex Nut |
mismatch |
|
diff. thread, can
use 2000-310 if
replaced along with 2000-302 |
| 752-228 |
Large Flat Washer |
mismatch |
|
not used |
| 752-229 |
Rubber Crutch Tip |
2000-118 |
CT Support Leg Tip,
1" |
same |
| 752-230 |
1/4-20 Wing Nut |
mismatch |
|
different size,
thread |
| 752-232 |
1/4-20 Hex Nut |
mismatch |
|
not used |
| 752-236 |
1/4-20 x 1"
Hex Bolt |
mismatch |
|
not used |
| 752-302 |
Ball Return Tray,
L |
mismatch |
|
different shape,
size, color |
| 752-303 |
Ball Return Tray,
R |
mismatch |
|
different shape,
size, color |
| 752-304 |
Tray Strap |
2000-140 |
Tray Strap |
same |
| 753-101 |
Back Panel |
mismatch |
|
diff. color, support
wings finished on opposite side, can use 2000-142
if you round off top tab & widen opening in bottom of
support flange and you replace it along with 2000-146,
2000-156, 2000-154, & 2000-318 |
| 753-101N |
New Back Panel |
mismatch |
|
diff. color, support
wings finished on opposite side, can use 2000-142
if you round off top tab and widen opening in bottom of support
flange |
| 753-102 |
Front Panel |
2000-162 |
Front Cover |
diff. color, shape,
could be used for 2000-162
if necessary, but may interfere with ball channeling |
| 753-103 |
Ball Return Plate |
2000-144 |
Ball Feed Collector
Plate |
diff. color, not
normally seen (covered by balls) |
| 753-104 |
Ball Return Housing |
mismatch |
|
diff. shape, color,
attachment |
| 753-105 |
Ball Return Adapter |
2000-196 |
Oscillator Pivot
Guide |
different color |
| 753-106 |
Pan. Gears &
Motor Hsng. |
2000-204 |
Oscillator Motor
Cover |
different color |
| 753-107 |
Ball Discharge Tube |
2000-166 |
Ball Feed Discharge
Tube |
different color,
not easily seen |
| 753-108 |
Ball Discharge Housing,
L |
2000-172 |
Robot Head Housing,
L. |
different color |
| 753-109 |
Ball Discharge Housing,
R |
2000-174 |
Robot Head Housing,
R. |
different color |
| 753-110 |
Pan. Motor &
Gear Frame |
2000-206 |
Osc. Motor Mounting
Plate |
diff. color, not
visible on outside, if replacing 753-110 with 2000-206,
use only 2000-326
screws |
| 753-111 |
Ball Return Motor
& Gear Housing |
mismatch |
|
not used, can use
2000-146 if replaced along with
2000-156, 2000-154,
2000-318, & 2000-142. |
| 753-111A |
Ball Feed Back Plate |
2000-146 |
BF Gear Mounting
Plate |
diff. color, not
easily seen |
| 753-111B |
New Ball Feed Motor
Frame |
2000-156 |
BF Motor Mount Housing |
diff. color, not
easily seen |
| 753-111C |
Ball Feed Brass
Gear Posts |
2000-154 |
BF Transfer Gear
Brass Shaft |
same |
| 753-111D |
Screws For 753-111A |
2000-318 |
BF #4×5/16 Machine
Screw |
same |
| 753-112 |
Control Lever Adapter |
mismatch |
|
diff. shape, color,
can use 2000-198 if replaced along
with 2000-200 & 2000-202 |
| 753-112N |
New Control Lever
Adapter |
2000-198 |
Osc.Control Lever
Adapter |
diff. color, includes
lever guard |
| 753-113 |
Friction Block |
mismatch |
|
diff. color (not
easily seen), tabs are shorter, can use 2000-192
if replaced along with 2000-190,
2000-184, & 2000-324 |
| 753-113N |
New Friction Block |
2000-192 |
Ball Feed Friction
Block |
diff. color, not
easily seen |
| 753-114 |
Old Ball Discharge
Wheel |
mismatch |
|
not used, has small
undulations in wheel surface, can use 2000-190
if replaced along with 2000-192,
2000-184, and 2000-324 |
| 753-114N |
New Ball Discharge
Wheel |
2000-190 |
Ball Speed Discharge
Wheel |
diff. color, not
easily seen |
| 753-115 |
Motor Cap-Ball Discharge |
2000-188 |
Ball Speed Motor
Cover |
diff. color |
| 753-116 |
Ball Return Gear |
2000-148 |
Ball Feed Main Gear |
diff. color, not
normally seen (covered by balls) |
| 753-117 |
Osc. Motor &
Pinion Gear |
2000-148 |
Osc. Motor W/Brass
Gear |
same |
| 753-117W |
Oscillator Wire |
2000-210 |
Osc. Power Wire |
same |
| 753-118 |
Control Lever, R |
mismatch |
|
diff color, shape,
can use 2000-202
if replaced along with 2000-198
& 2000-200 |
| 753-118N |
New Control Lever,
R |
2000-202 |
Control Lever, R |
diff. color |
| 753-119 |
Control Lever, L |
mismatch |
|
diff color, shape,
can use 2000-200
if replaced along with 2000-198
& 2000-202 |
| 753-119N |
New Control Lever,
L |
2000-200 |
Control Lever, L |
diff. color |
| 753-120 |
Ball Discharge Knob
Nut |
|
|
same as 753-227 |
| 753-121 |
Ball Discharge Tube
Pivot Screw |
|
|
same as 753-143 |
| 753-123 |
Ball Gear Fingers |
2000-150 |
BF Main Gear Fingers |
diff color, not
normally seen (covered by balls) |
| 753-124 |
Motor Bracket |
2000-212 |
Osc.Motor Mount
Bracket |
same |
| 753-125 |
Gear & Pinion
Cluster |
2000-152 |
BF White Transfer
Gear |
same |
| 753-126 |
Panning Drive Gear |
2000-216 |
Osc. White Drive
Gear |
same |
| 753-128 |
Brake-Ball Discharge
Tube |
2000-168 |
BF Discharge Tube
Brake |
same |
| 753-129 |
Horizontal Pointer |
2000-182 |
Robot Head Angle
Pointer |
same |
| 753-138 |
Ball Discharge Adjusting
Knob |
mismatch |
|
diff. thread, can
use 2000-180 if
replaced along with 2000-322 |
| 753-139 |
Ball Discharge Comp.
Spring |
2000-178 |
RH Steel Ball Spring |
same |
| 753-140 |
Friction Block Spring |
2000-194 |
BS Friction Block
Spring |
same |
| 753-141 |
Ball Sp. Motor &
Pinion Gear |
mismatch |
|
diff. size drive
shaft, has right hand threads in shaft, can use 2000-184
if replaced along with 2000-192,
2000-190, and 2000-324 |
| 753-141N |
New Ball Speed Motor |
2000-184 |
BS Motor W/Brass
Shaft |
same (has left hand
threads in shaft) |
| 753-141W |
Ball Speed Coiled
Cord |
2000-186 |
BS Coiled Power
Wire |
same |
| 753-142 |
Oscillator Gear
Washer |
mismatch |
|
not used (2000-326
has washer-type head) |
| 753-143 |
#4×3/8 Self Tap
Screw, Bl. |
2000-328 |
#4×3/8 Self Tap
Screw |
same |
| 753-144 |
#4×3/8 Self Tap
Screw, Gld |
mismatch |
|
not used, can be
substituted for 2000-328 |
| 753-145 |
Ball Discharge Wheel
Screw |
mismatch |
|
right hand threads,
can use 2000-324
if replaced along with 2000-192,
2000-190, and 2000-184 |
| 753-145N |
Ball Discharge Wheel
Screw,
(L Thread) |
2000-324 |
BS Discharge Wheel
Screw |
same, left hand
threads |
| 753-146 |
Ball Disc. Whl.
Lock Washer |
mismatch |
|
not used |
| 753-147 |
#1×3/16 Thread Form.
Screw |
mismatch |
|
diff. thread, use
753-147 only with 753-110 that has solid plastic posts, do
not use if 753-110 has brass posts (use 2000-326
instead) |
| 753-148 |
Ball Feed Motor
& Gear |
2000-158 |
BF Motor W/Brass
Gear |
same |
| 753-148W |
Ball Feed Wire |
2000-160 |
BF Power Wire |
same |
| 753-149 |
#8 x 5/16 Self Tap.
Screw |
mismatch |
|
not used |
| 753-150 |
Ball Discharge Spring |
2000-170 |
Ball Feed Discharge
Spring |
same |
| 753-151 |
5 Pin Receptacle |
2000-218 |
5 Pin Connector |
same |
| 753-152 |
Connector Cable |
2000-220 |
Connector Cable |
end terminals not
removable |
| 753-153 |
Ball Feed Gear Washer |
2000-314 |
Large Washer |
same |
| 753-154 |
Steel Ball |
2000-176 |
Robot Head Steel
Ball |
same |
| 753-155 |
Ball Disc. Housing
Screw |
2000-320 |
RH #8×1 3/16 Machine
Scw |
same |
| 753-156 |
3/16 Motor Mount
Screw |
2000-330 |
#2×1/4 Machine Screw |
has washer type
head, washer not necessary |
| 753-232 |
3/4 Shoulder Bolt
For Trays |
mismatch |
|
not used |
| 753-232A |
3/8 Lock Nut For
Trays |
mismatch |
|
not used |
| 753-350 |
Control Box |
2000-224 |
Control Box |
different electronics,
labels, has Pong-Master connection |
| 753-350-1 |
Voltage
Regulator (Q1&Q3) |
2000-224-8 |
Osc.
& Ball Speed Voltage Regulator |
same |
| 753-350-2 |
Voltage Regulator
(Q2) |
2000-224-7 |
Ball Frequency Voltage
Regulator |
same |
| 753-350-5 |
Small Capacitor
(C1–C4) |
2000-224-25 |
Tiny Capacity |
Same |
| 753-350-6 |
Large Capacitor
(C5) |
mismatch |
|
both leads at one
end |
| 753-350-7 |
Resistor (R1 &
R3) |
mismatch |
|
not used |
| 753-350-8 |
Resistor (R2) |
mismatch |
|
not used |
| 753-350-9 |
Ball Speed Potentiometer |
mismatch |
|
longer leads with
different shape |
| 753-350-10 |
Ball Freq. Potentiometer |
mismatch |
|
longer leads with
different shape, diff range |
| 753-350-11 |
Osc. Speed Potentiometer |
mismatch |
|
longer leads with
different shape |
| 753-350-15 |
Power Jack |
2000-224-6 |
Power Jack |
same |
| 753-350-16 |
Lighted Power Switch |
2000-224-17 |
Lighted Power Switch |
same |
| 753-350-25 |
Foam Pad For Control
Box |
2000-224-18 |
Control Box Foam
Pad |
same |
| 753-350-26 |
Control Box Knobs |
2000-224-12 |
Control Box Knob |
same |
| 753-450 |
Transformer |
2000-222 |
Transformer Cord |
same |
| 900-125 |
Owner’s Manual |
mismatch |
|
not the same |
| 900-130 |
Ball
Dams (Pair) |
mismatch |
|
diff.
shape, size, color |
| 900-134 |
End Fitting For
Conn Cable |
mismatch |
|
not used |
